Table of Contents
Best Carving Longboards of 2021 by Longboard Pro
Carving is one step ahead of basic longboarding.
If you know the little steps of longboarding then you can shoot for carving, because it is phenomenal to push the rest of the world behind you.
Furthermore, carving is not that difficult. It is simple synchronization of pushing back and forth but the aura that it leaves on you will be extremely addicting.
We know it’s not easy to choose the right longboard out of dozens available in the market. Moreover, if you make the wrong decision then you will end up losing the longboard or teeth. Therefore, we are here to save you time and energy.
This article will guide you through the in-details specification, pros, and cons,and features of the top rated carving longboards.
What To Look Before Buying Carving Longboards?
They say you can carve on any longboard but if you ask us then we will tell you the truth based upon our research. Carving requires a longboard with trucks that can easily swing and turn.
It also requires the perfect size of the deck otherwise you will be facing the wheel bites while turning.
However, there are many things that you should take notice of before making a final decision. We have penned down a few salient features of the best carving longboard
- Proper flex for better response to turns.
- Big wheels with good roll speed and balance.
- Round and soft bushing sheets for smooth carving.
- Higher trucks for bite-less carving.
- Mediocre-sized deck with the concave center for better pushing.
- For a deeper sense of carving longboards, we have made a handpicked list of longboards for carving. Let’s unveil it.
Best Longboards For Carving Reviews ( 2021 Updated)
1- Playshion Drop Through Freestyle Longboard
Playshion drop-through longboards are specially designed for freestyle riding, cruising, carving, free ride, and sliding.
It has a deck of perfect size and it is ideal for all ages especially for kids of age eight plus.
Further, it can be stopped with one foot and has low ground clearance which means now you can push and brake without a fumble.
Construction
It is made up of maple wood but the flex is mind-blowing. The 8-ply deck is enough to keep you carving without a doubt of chipping and breaking.
Anyone can enjoy the ride over this board because of its lighter weight and greater bearing capacity. Further, the maple wood gives the board the ideal stability and robustness.
Shape And Design
The shape of the board is symmetrical and flat. However, there is a slight concave in the middle of the board which is meant for holding the rider at its place in case of bumps.
The deck is solid and can hold up to 250 pounds of weight. Talking about the design, it is quite simple and sort of classic. The drop-through design is ideal for more stability, especially for new riders.
Wheels And Trucks
The size of the wheel matters a lot for carving so Playshion has wider wheels with the width of 51mm wider wheel with ABEC 9 bearings.
Although it comes assembled to your doorstep there is always room for slight adjustment of trucks. It has 7-inch reverse kingpin aluminum alloy trucks with 88A PU bushings, with which you can take sharp turns.
Size And Weight
The size of the longboard is 39 inches deck and 9.1 inches wide with 4 inches ground clearance for smoother and controlled riding. The weight of the longboard is 7 pounds only, which makes it portable.
Further, the longboard comes with a greater package of skate tools and stickers. Now anybody can cruise without thinking about the height.
- Softer bigger wheels
- Aluminum trucks.
- Deck is stable
- Ideal for lightweight riders.
- Bearings need lubrication
- The deck can be easily scratched
Final Verdict
2- Retrospec Zed Pintail Longboard
If you want to enjoy the feel of sunny, beachy and wavy surfboarding then we present you the zed longboards. They have the perfect pintail shape of surfboards. Further, you can not only use it for carving but also for commuting purposes.
Construction
The zed artistic longboards are made up of 8 ply Canadian maple wood mixed with high-quality tightly bamboo wood. This combination of maple and bamboo makes a solid hybrid of strength and flexibility.
Shape And Design
The shape is pintail with high quality and environment-friendly material. Not only do they are robust but the design gives you vintage and classic vibes. Sometimes you may get the feeling of sandy beaches while riding on the board.
Wheels And Trucks
The wheels are super soft and made up of polyurethane material. plus, the width of the wheels is 70mm with the ABEC 7 bearing, which is essential for feather-soft turning and cruising. The deck is designed in a way that you will never encounter the wheel bite.
Size And Weight
The size of this artisan board is 44inches with a weight of 7.65 pounds. Further, it comes assembled at your doorstep you only have to stay ready to hit the road. The deck is made up of bamboo and maple wood and well fitted for daily transportation.
- Great for speed
- Sharp pointy design
- Anti-bite technology
- Soft 70mm wheels
- Slightly hard to push
- Slightly slow bearings
Final words
3- Volador 42inch Freeride Longboard
Volador longboards are built with premium quality material. The deck is designed in such a way that will set your mind at rest with an anti-bite feature.
The wheels, trucks, and bearing are all high-end, forged with precision. With such characteristics, the longboard will be suitable for extraordinary maneuverability.
Construction
Talking about the construction of the Volador let us tell you that it is made up of high maple wood cold-pressed into a beautiful camber concave deck. Further, the construction is designed in an environmentally friendly way with epoxy glue layers of the deck.
Shape And Design
The shape of the deck is designed after peering into the mind of artists from all over the globe. The classic drop-through design for soulful carving and the camber concave deck for stability. The design is fully ranged from 1960s retro, pure vintage ones to modern Avant garde.
Wheels And Trucks
The wheels are large with a 34-inch base which completely caters to the functionality of a 9-inch deck. The trucks are the best longboard trucks for carving and flexible with the flipping ability to 50degrees. It helps you to practice heart-pounding sharp corners.
Size And Weight
The size of the board is perfect for all the new riders, boys, girls, and adults. The length of the board is 42 inches with a width of 9 inches.
The shock-absorbent nature of the longboard enables the riders the cruise for hours. Plus, the weight of the board is very light, totaling 8.4 pounds.
- Easy to carry
- Wheels are soft and reliable
- The design doesn’t scuff
- 7-inch reverse kingpin trucks
- Entry-level board
- Bearings require upgrade
Final words
4- Magneto Bamboo Longboards For Cruising (Lightweight Board)
As the name suggests that Magneto longboards are made up of bamboo which makes them lighter in weight. These longboards leave you no choice but to cruise, free ride, and carve around the neighborhood. It has a durable deck with a handful of spaces where you can land to show some pro-tricks.
Construction
The longboard is made up of environment-friendly 3 plies of bamboo which gives the board more flexibility. Bamboo mixed with fiberglass for sustainable flex and durability.
They are designed with an anti-gravity feature which means no more fear of edgy roads. The Paris drop-through style provides more stability and maneuverability to the board.
Shape And Design
The shape of the magneto board is symmetrical with drop-through trucks. However, if you look at the center then you can notice the slight concave room for the easy landing of the feet. Plus, the deck of the board has a nice arched chamber.
The concave board with chamber provides more responsiveness to the board while carving.
Wheels And Trucks
The trucks are made up of high-end material with great rotating ability. Further, for hardcore cruising and wind crushing riding magneto hold gravity cast aluminum trucks.
Plus, the tricks have a kingpin angle of 50 degrees and a 7-inch hanger. The wheels are soft and feel like a breeze when gliding over the road with the durometer hardness of 78A shore.
Size And Weight
The size of the deck is 38.5 inches in length and 9 inches wide with center concave for better grip while riding. The weight of the longboard is so light that you can take it with you anywhere. The total body weight is 6.65 pounds.
- Aluminum trucks and bearings.
- Concave deck
- Bamboo and fiberglass made
- Great for cruising.
- Not for heavy riders
- Slightly huge.
Final words
5- Sector 9 Chamber Drop Through Flush Mount Skateboard
If you are looking for the perfect fun time apart from the busy schedule where you can cruise over the coast and wind will be blowing your hair, then we recommend a sector 9 skateboard.
The reason behind this is their top-class quality and they use high-end sector 9 hardware. All the components are juicy enough to make your cruise and enjoy the free ride.
Construction
The sector 9 drop-through board is made up of 8 ply maple wood. The board looks perfect for those who want to ride to work, friends, and the neighborhood.
Further, it has a little kicktail that makes it pop to your hands easily. The bottom of the skateboard is made up of teak which makes it more attractive and robust.
Shape And Design
The board is symmetrical in design having a slight kicktail feature. Further, the drop-through flush mount makes it more reliable while carving.
The wheels stay away from the board, and when you apply the pressure to move forward the camber kick mold equally handles the weight. The design of the board is not a sticker but it is printed.
Wheels And Trucks
The wheels are 69mm in width with a 78A offset. The wheels feel like rubber when they glide over the road. The wheel size is mediocre which gives perfect grip while carving.
The 9inches gullwing trucks enable swift turns and cut edges. Further, it comes with 9 ball bearings and 1.125-inch mounted steel bolts.
Size And Weight
The size of the deck is 33.125 inches in length, and the width is 8.125-inches. The weight is quite reasonable 6.6 pounds. The wheelbase is 2.175 inches. Now you can go to college and tuition just keep this little mate with you which saves you from traffic.
- Lower teak layer
- Wider wheels
- Suitable for carving
- Deck is durable
- Wheel color may vary
- For skilled riders
Final words
6- Atom Drop Deck Longboard
Atom drop through is the product of MBS, an old company founded in 93 in Colorado. MBS has a goal to take skateboarding to new levels. They are a pioneer in making high-quality sports goods and have now debuted in the field of carve boards and longboards.
Construction
This longboard is stable, stylish, and sturdy. A fully laminated maple deck gives you great pleasure when you hop on it to take the round of the city. The longboard is constructed to be ultra-low for premium stability.
Shape And Design
The shape of the deck is designed to cancel the center of gravity so that novice riders can pull it off.
Further atom’s drop-through design gives pro riders the leverage of having fun and exploring the world. Design over the board is quite basic but it will not scuff with time. The deck is covered with grip tape for anti-fall protection.
Wheels And Trucks
Once you visit the market you will get to know that the reputation of Atom’s wheels and trucks is quite reliable. The wheels are broad 70mm which serves best for downhill carving.
Plus, the wheels are made up of super high polyurethane wide lip 51mm. Reverse kingpin trucks are robust with ABEC-9 bearings and a 245mm axle.
Size And Weight
The size of the longboard is 41 inches. It is perfect for those who want larger boards. Its deck width is4.72 inches. The deck is covered with 80S grip tape. Talking about the weight then it is highly cartable with the weight of 10.14 pounds.
- Stable maple deck
- Good or new and pro riders
- Wheels are soft
- One year warranty
- Slightly expensive
- Large in size
Final words
7- Atom Drop Through
Another Atom longboard is manufactured by the same Colorado-based company. This board is made of sturdy maple wood having great downhill carving features. The wheels, the trucks, and the deck are made up of high-end material. even the novice can give it a shot.
Construction
The deck is made up of maple wood. The make of the board is unique as it gives you the leverage of 9.6 inches in every turn.
The trucks are made up of metal and wheels are quite soft and glide over almost everything.
Shape And Design
The shape of the deck is quite comfortable. It has enough room for the heavy and lighter riders to land their feet and cruise. The design is pretty solid and available in many colors.
Plus, has a longer life than many high-priced longboards. The drop-through design supports the downhill carving and around the campus riding.
Wheels And Trucks
The wheels glide like butter; they are wide and made up of soft polyurethane material. Wheels make it easy to push even if you are a new rider.
The reverse kingpin trucks are good but if you are an aggressive rider then you might face some hurdles, the bushing is great for novice riders.
Size And Weight
The size of the longboard is 41 inches in length and the deck length is 104 centimeters. The longboard is ultra-low to cancel the gravity.
The weight of the longboard is a very minimum of 8.99 pounds. Now you can go to campus and keep it with you, forget about the long traffic lines.
- Good for beginners
- Great speed pickup
- Maple deck
- Versatile color and designs
- Problematic trucks
- Less efficient bearings
Final words
Wrapping Up
Carving boards are unlike other boards they require good deck stability, great trucks, and rubber soft wide wheels. It is not possible to do downhill carving on regular longboards. The list of best carving longboards we have described above is well defined for any buyer to make a wise decision.
However, if you ask us our pointer will click to the Sector 9 chamber drop through longboard. Though it is slightly towards a higher price, what they said is spend once and live happily ever after. It has great hardware parts including wheels, bearings and bushes. Trucks are solid and the deck is made up of 7 plies of maple wood and camber kick mold.
Another nomination will be Playshion freestyle longboard. It is best for children and teens. They are easy to push and brake. Further, we would like to opt for Atom drop through longboard because they are a very sturdy, and complete package for downhill carving.
FAQs
- What Type Of Longboard Are Best For Carving?
The longboard has a lower deck which gives the rider more leverage. The trucks must be mounted at the end of the deck. The top mount style commuter is also good for carving.
- Can You Carve Any Longboard?
Carving is not an initial longboarding trick to perform, it requires special trucks and lots of leverage with wheels that can turn swiftly. However, longboards are best for carving as compared to skateboards.
- What Trucks Are Best For Carving?
The best longboard trucks for carving are reverse kingpins with 50 degrees angle. Higher the angle of longboards higher will be the response of the longboard towards big turns.
- Is It Hard To Carve On Longboard?
Longboards are meant for carving. They mimic the snowboard construction. The only difference will be the greater width, length, and too many turns.
- Can You Carve On A Cruiser?
Yes, you can carve on a cruiser but we will not recommend doing it because cruisers have shorter wheels and they don’t perform well to carving. They are good for regular skateboarding.
Leave a Reply